This is a traditional analog State Variable Filter (SVF) implementation that incorporates Vactrols.
Functionality
- Ideal for creating ACID and LEAD sounds
- Features resonance control
- Simultaneously provides LOWPASS, HIGHPASS, and BANDPASS outputs
- CUTOFF frequency control via CV input
- Supports GATE signals as CV input thanks to Vactrol integration
Inputs
- AUDIO Main audio input to be filtered
- CV CV input for cutoff frequency modulation
- MULT A socket of the multiplier for either audio or signal
- MULT A socket of the multiplier for either audio or signal
- MULT A socket of the multiplier for either audio or signal
Outputs
- LF Low-pass filtered output
- LF Low-pass filtered output (duplicate)
- HF High-pass filtered output
- HF High-pass filtered output (duplicate)
- BF Band-pass filtered output
Controls
- RESONANCE: Adjusts the filter's resonance level
- FREQ: Sets the CUTOFF frequency of the filter (CV input is limited to this maximum value)
- FREQ CURV: Reduces the filter's frequency range for more precise control (turn clockwise to decrease range)
Additional Parts
This section is only relevant if you are buying the semi-assembled module. You have to source & solder the following parts. You can check our guide on common parts for where to source these components.
- 2.54mm Header Pins (5-pin) - 2
- Circular Pin Header Sockets (5-pin) - 2
- 50K Potentiometers - 1 (FREQ CURVE)
- 500K Potentiometers - 1 (RESONANCE)
- 1M Potentiometers - 1 (FREQUENCY)
- Vactrols - 2